Bespoke Drawer Boxes for Wardrobes UK: Sizes & Prices

Fitting out a bedroom takes precision, and nowhere is that more obvious than when you're specifying bespoke drawer boxes for wardrobes. Freestanding furniture can be shuffled into position, but built-in storage has to align with sliding door tracks and internal dividers to work at all. DoorsDirect has operated as a family-owned business for over 40 years, and we manufacture every component bespoke to your specifications, so you get storage that fits your exact aperture rather than an approximation. That direct approach cuts out showroom overheads while keeping the standards a premium finish needs.

Understanding Bespoke Drawer Box Sizing for UK Wardrobes

Choosing the right width for wardrobe interior drawers isn't like buying a standard chest of drawers. These components have to sit inside a sliding door system, and track alignment dictates how much usable space you actually have. You can't just measure the wall and assume a drawer unit will fit, the structural columns and door overlaps reduce the clear opening available for internal fittings. Get it wrong and the drawers bind against the frame, or won't close properly behind the sliding panels.

Why Standard Widths Matter for Sliding Door Interiors

We manufacture bespoke drawer boxes in specific increments so they align with the vertical dividers that support sliding door tracks. Our 600mm and 850mm widths match the standard bay sizes in our interior systems. That's deliberate: generic joinery that ignores door gear geometry causes installation conflicts. Coordinating the external doors with the internal storage is what separates a professional installation from a compromised retrofit.

Measuring Correctly for a Flush Fit

Measure the internal aperture, not the external wardrobe frame. Getting this right matters because the soft-close mechanism needs a true, unobstructed width to operate without binding. Check the clear width between uprights at multiple heights, since walls often bow or taper, and use the smallest reading as your definitive constraint. If your space falls outside standard increments, contact our team for advice rather than forcing a standard unit into a non-standard gap. Doing that voids guarantees and damages the mechanism.

600mm Drawer Boxes: Specifications and Pricing

The 600 drawer box is the primary storage module for narrower wardrobe bays, or for secondary columns in larger runs. It has high-quality metal sides, a solid 16mm base panel and smooth soft-closing action, and it arrives fully assembled. That pre-assembly is what sets it apart from flat-pack alternatives, which rely on cam locks and dowels that loosen over time. Our welded metal construction holds its rigidity through decades of daily use.

Dimensions and Build Quality

This unit measures up to 600mm wide by 400mm high and 500mm deep, with enough capacity for folded clothing while staying compact enough for tight alcoves. The metal-sided drawers run on concealed runners rated for heavy loads, and the solid 16mm base panel won't sag even when fully laden with denim or knitwear. Because each unit arrives fully assembled, you don't get the misaligned drawer fronts that plague site-built joinery.

Current Price Expectations

Pricing for the 600mm model sits around GBP 340, though it's worth checking the product page, since material costs move about. You'll need to order top and bottom panels separately unless you're fitting the unit between existing shelves, and that affects your total project budget. Pricing components this way means you build exactly what you need without paying for redundant parts.

850mm Drawer Boxes: Wider Storage Solutions

When your wardrobe bay exceeds standard proportions, the 850 drawer box gives you wider storage without giving up build quality or visual consistency. This size suits master bedrooms, where bulkier items like bedding or seasonal wear need broader drawer faces to stay accessible.

When to Choose the 850 Width

Choose the 850mm variant when your clear aperture can take it without eating into adjacent hanging space or shelf stability. It has the same premium metal-sided construction and 500mm depth as the narrower version, so it stays visually consistent across mixed-width interior runs. The wider format also means fewer vertical dividers, which maximises usable storage volume in the same footprint.

Cost Comparison to Narrower Units

This wider specification sits around GBP 380, and it gives you more storage volume per pound than installing two narrower units side by side. You still need to order top and bottom panels separately, just as with the 600mm version, so factor that into any comparison. The modest price increase buys significantly more drawer frontage, which makes it the economical choice wherever your aperture allows it.

Pairing Drawer Boxes with Made-to-Measure Shelving

A good wardrobe interior balances enclosed drawer storage with open shelving for anything that needs to stay visible or within easy reach. Made-to-measure shelves fit directly above or below drawer boxes, using matching 2mm PVC edging and furniture-grade board so the whole thing looks like one piece. That modularity lets you set the ratio of hidden to open storage to suit what you actually own, instead of accepting a fixed configuration.

Matching Shelf Widths to Drawer Units

Our shelving range includes widths that line up exactly with drawer box dimensions, so you're not left with awkward filler strips or unsupported spans. A made-to-measure 850mm shelf sits directly above an 850 drawer box, sharing the same depth and edge detailing for a clean alignment. The 600mm and 1100mm shelves work the same way, pairing with their respective drawer counterparts or spanning wider openings where drawers aren't needed.

Creating a Cohesive Interior System

Shelves cost a good deal less than drawer units, so you can balance budget against function within the same interior run without mixing materials that don't match. Each shelf arrives complete with brackets and 18mm melamine-faced chipboard edged all round, matching the specification of our drawer bases and interior panels. That consistency is what makes a wardrobe look professionally designed rather than pieced together.

Integrating Drawers into Complete Wardrobe Interiors

Standalone drawer boxes fill the gaps that hanging rails and standard shelving can't cover. The Interior 2 Door B set, for instance, gives you good hanging and shelf capacity but no dedicated drawer storage for smaller items. Add a bespoke drawer box to that configuration and a basic layout becomes a proper dressing solution, without replacing the whole system.

These components share the same 18mm Egger board specification and design language, so the finish looks seamless whether you install everything at once or add the drawers later. All drawer boxes and interior components carry a 10-year guarantee and go through a three-stage quality assurance process before dispatch. That compatibility runs across our entire interior range, so you can expand your storage as your needs change.

Installation Considerations and Essential Fixings

Before delivery day, it helps to know what the drawer box does not include. Neither size comes with structural top or bottom panels, which you'll need to buy separately to create a rigid housing, unless you're fitting between existing shelves. Skip the top and bottom support and you risk racking, misalignment and eventual mechanism failure.

Required Top and Bottom Panels

Order top and bottom panels matched to your chosen drawer width. Together they form a stable enclosure that keeps the unit square during operation, and they also give you fixing points for securing the assembly to adjacent uprights or walls, so the load stays off the drawer runners themselves. If you're reusing existing shelving as substitutes, check it's perfectly level and securely fixed. Any deflection there transfers straight to the soft-close mechanism.

Fixing Brackets and Alignment

Use the recommended column fixing brackets to keep the unit square and the soft-close mechanism running smoothly for years. These brackets anchor the drawer box to the vertical dividers at set intervals, which stops the lateral movement that causes binding or uneven gaps. Once adhesive sets or screws bite, the alignment is fixed, so check your diagonals and levels before final tightening.

Ordering Bespoke Drawer Boxes with Confidence

Nationwide delivery is handled exclusively by our own fleet of drivers, which takes third-party courier risk out of moving large, fragile interior components. That control over logistics means your drawer boxes arrive protected and ready to install, not battered by multiple depot transfers. Renovation timelines are usually tight, so reliable delivery matters as much as manufacturing quality.

Every order reflects decades of specialist focus on made-to-measure wardrobe interiors, not generalist furniture production. If your requirements fall outside standard widths, or you need guidance on pairing drawers with made-to-measure drawer units for alcoves, our team can advise on a bespoke solution. Full details on what our 10-year guarantee coverage protects are there to help you buy with confidence.