Accessories

Sliding Door Wardrobe Interiors and Accessories

A range of matching panels and interior units produced from high quality white or beech melamine faced chipboard. The front edge is finished with a 2mm thick PVC edging strip.

The components can be purchased individually to create a unique wardrobe interior to your own design or purchased as sets with all the parts needed for you to build a wardrobe interior.

Special lights can be fixed between the top track and the ceiling to shine on the front of your doors highlighting the colour and design and giving clear visibility to the interior of the wardrobe when the doors are open.

End panel 2620mm x 640 x 18mm
An end panel is typically used to form the end of the wardrobe when the doors are not going up to a wall. The end panels are available in a variety of colours to complement the frame and door panels. to order end panels click here

end panel

Strike plate 2620mm x 100 x 18mm - when the doors are closing up to a wall this panel can be used to overcome any irregularities in the wall. It can be cut to fit on top of the skirting board or the skirting can be removed. The doors simply butt up to the strike plate. to order strike plates click here

strike plate fitted between skirting boards

Interior Sets

Example above shows Option A
interior suitable for a 4 door set.
Designs also available to suit 2,
3 or 5 door sets.

Example above shows Option B
interior suitable for a 4 door set.
Designs also available to suit 2,
3 or 5 door sets.

For each door set we offer a choice of two interior packs. Option A is a combination of double and single hanging with a top shelf and Option B has double and single hanging combined with small shelves and a top shelf 2140mm high

The interior packs are designed using your room walls as the back and either your walls or end panels as the sides. The packs contain all the components needed to build your wardrobe interior, just cut the parts to fit your space and install.

Alternatively the components can be purchased individually so you can customise your interior to suit your lifestyle.

to order interiors click here

Individual Interior Components

Shelf stack 2140mm high x 500mm x 500mm - consists of two side panels, three fixed shelves and two adjustable shelves. The side panels are all pre drilled and the adjustable shelves can be positioned as required.

shelf stack

Adjustable shelf extra shelf to fit shelf stack .

adjustable shelf

Wire basket a chrome wire basket complete with runners to fit shelf stack, the runners simply screw to the sides at the required position.

wire basket

Shelf / upright panel 2620mm high x 500 x 18mm - to be cut as required for shelving. Please note maximum unsupported length should be 1200mm, for greater spans either sit on top of shelf stack or use additional panels as uprights.

Hanging rail 3000mm long chrome rail supplied with 6 metal end brackets, can be cut as required. Please note maximum length should be 1200mm.

hanging rail

close this window