A range of matching panels and
interior units produced from high quality 18mm white melamine faced chipboard.
The front edge is finished with a 2mm thick PVC edging strip.
End panel 2620mm x 610mm - this
panel is typically used to form the end of the wardrobe when the
doors are not going up to a wall.
Strike plate 2620mm x 100mm -
when the doors are closing up to a wall this
panel can be used to overcome any irregularities in
the wall. It can be cut to fit on top of the skirting board or the
skirting can be removed. The doors simply butt up to the strike
plate.
Shelf stack 2140mm high x 500mm
x 500mm - consists of two side panels, three fixed shelves and two
adjustable shelves. The side panels are all pre drilled and the
shelves can be positioned as required.
Adjustable shelf extra shelf to
fit shelf stack.
Wire basket a chrome wire
basket complete with runners to fit shelf stack, the runners simply
screw to the sides at the required position.
Shelf / upright panel 2620mm
high x 500mm - to be cut as required for shelving. Please note
maximum unsupported length should be 1200mm, for greater spans
either sit on top of shelf stack or use additional panels as
uprights.
Hanging rail
3000mm long chrome rail supplied with 6 metal end brackets, can be
cut as required. Please note maximum length should be 1200mm.
