|
Grain direction - woodgrain
and decorative patterned finishes will be supplied with vertical
grain to all doors and drawer fronts by default. An option is
available to order small drawer fronts with horizontal grain if
preferred, in addition the Alto and Milan doors can be ordered with
horizontal grain up to a height of 897mm
Handles & Hinges
- please note that handles and hinges are not supplied with the
doors but can be ordered from our handle & hinges section
Hinge drilling -
if you select the drilled option a 35mm diameter hole will be
drilled in the back of the door to take our standard self closing
hinges. The centre of the hole is positioned 100mm from the top and
bottom of the door and additional holes on large doors are spaced
equally. The edge of the hole is 6mm in from the edge of the door.
Please note: these doors are designed to fit on to a carcase, i.e.
they fit on to the face of the cabinet, with an overlap of 13-16mm
Handing
- if ordering drilled doors on certain styles of door you need to
specify the handing, left hand means the hinge holes would be on the
left hand side of the door when viewed from the front
Care & Maintenance
|
